Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 10 micron/HR4-994/HR4-995/HR4-999/HR4-997

上海金畔生物代理Hampton research品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Hampton research官网或者咨询我们获取更多相关Hampton research品牌产品信息。

Products > Cryocrystallography > CryoLoops > Mounted CryoLoop™ – 10 micron

Mounted CryoLoop™ – 10 micron

Mounted CryoLoop™ - 10 micron
Mounted CryoLoop™ - 10 micron
Mounted CryoLoop™ - 10 micron
CAT NO

HR4-994

NAME

Mounted CryoLoop – 10 micron

DESCRIPTION

0.025-0.05 mm – 25 pack

PRICE

$91.00

CAT NO

HR4-995

NAME

Mounted CryoLoop – 10 micron

DESCRIPTION

0.05 – 0.1 mm – 25 pack

PRICE

$91.00

CAT NO

HR4-997

NAME

Mounted CryoLoop – 10 micron

DESCRIPTION

0.1 – 0.2 mm – 25 pack

PRICE

$91.00

CAT NO

HR4-999

NAME

Mounted CryoLoop – 10 micron

DESCRIPTION

0.2 – 0.3 mm – 25 pack

PRICE

$91.00

应用

  • Cryocrystallography
  • 低温晶体学

特征

  • Synthetic CryoLoop on stainless steel MicroTube
  • MicroTube specially engineered with EasySnap notches
  • 不锈钢 MicroTube 上的合成 CryoLoop
    MicroTube 特别设计,带有 EasySnap 凹槽

描述

Mounted CryoLoops with 10 micron diameter nylon. The 10 micron Mounted CryoLoop shows less background diffraction than the 20 micron Mounted CryoLoop. Please note that the 10 micron Mounted CryoLoops are very flexible due to their small diameter. These nylon loops are bonded to hollow, stainless steel MicroTubes™ that are used to mount, freeze, and secure the crystal during cryocrystallographic procedures and X-ray data collection. The MicroTube is 24 mm in length and is specially engineered with EasySnap™ notches at the 10, 12, 14, 18, and 21 mm measures. To obtain the desired length of MicroTube, simply snap the MicroTube at the desired length and secure to the CrystalCap using epoxy or similar adhesive. These nylon loops show minimal diffraction, are thin for fast freezing, strong, and aerodynamic.

Most data collection geometries prefer or require a 22 mm length between the base of the cap and the beam. For a 22 mm overall length using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT and CrystalCap SPINE HT, snap the MicroTube at the second notch from the bottom, creating an 18 mm MicroTube lenghth and secure to the CrystalCap using epoxy or similar adhesive. For a 22 mm over length using the CrystalCap Copper, CrystalCap Copper HT, CrystalCap ALS Copper HT snap the MicroTube at the fifth notch from the bottom (notch closest to the CryoLoop) and secure to the CrystalCap using epoxy or similar adhesive.

安装有 10 微米直径尼龙的 CryoLoops。 10 微米安装的 CryoLoop 显示的背景衍射比 20 微米安装的 CryoLoop 少。请注意,10 微米安装的 CryoLoop 因其小直径而非常灵活。这些尼龙环与中空不锈钢 MicroTubes™ 粘合,用于在低温晶体学程序和 X 射线数据收集过程中安装、冷冻和固定晶体。 MicroTube 的长度为 24 毫米,专门设计了 10、12、14、18 和 21 毫米尺寸的 EasySnap™ 凹槽。要获得所需长度的 MicroTube,只需将 MicroTube 卡入所需长度并使用环氧树脂或类似粘合剂固定到 CrystalCap。这些尼龙环显示出最小的衍射,很薄,可以快速冷冻,坚固且符合空气动力学。

大多数数据收集几何结构更喜欢或要求帽底和梁之间有 22 毫米的长度。对于使用 CrystalCap、CrystalCap ALS、CrystalCap ALS HT 和 CrystalCap SPINE HT 的 22 mm 总长度,将 MicroTube 从底部的第二个凹口处卡入,形成 18 mm 的 MicroTube 长度并使用环氧树脂或类似粘合剂固定到 CrystalCap。对于 22 mm 以上的长度,使用 CrystalCap Copper、CrystalCap Copper HT、CrystalCap ALS Copper HT 将 MicroTube 卡在从底部算起的第五个槽口(最靠近 CryoLoop 的槽口),并使用环氧树脂或类似粘合剂固定到 CrystalCap。

参考HR4-994 Mounted CryoLoop 0.025 – 0.05 mm

1. A novel approach to micro-sample X-ray powder diffraction using nylon loops. Reibenspies and Bhuvanesh. J. Appl. Cryst. (2003). 36, 1480-1481.

1. 一种使用尼龙环进行微量样品 X 射线粉末衍射的新方法。 Reibenspies 和 Bhuvanesh。 J.应用。 水晶。 (2003 年)。 36, 1480-1481。